Enhancement of thermoelectric properties of D-A conjugated polymer through constructing random copolymers with more electronic donors

Developing new D-A conjugated polymer system for thermoelectric (TE) application is highly desirable. Herein, a series of random copolymers by incorporating 3,4-ethylenedioxythiophene (EDOT) electron rich units into a diketopyrrolopyrrole (DPP) D-A conjugated polymer were designed and synthesized. Compared to the alternating conjugated copolymer PDPP-3T, the HOMO level of the random copolymers are increased as part of the electron deficiency acceptor DPP units in the polymer chain were superseded by electron rich EDOT, which could contribute to effective p-doping. Moreover, through incorporating EDOT to construct random copolymers, it can also induce an orientation change from face-on dominated to edge-on dominated orientation as well as enhance the packing of copolymer chains, which is beneficial to the charge transport. Under same doping condition, the electrical conductivities of the doped polymers increase and the Seebeck coefficient decrease as the increasing of EDOT content, resulting in an optimized power factor of 6.4 μW m⁻¹ K⁻² for the random polymer with EDOT content of 40% which is four times higher than that of alternating conjugated copolymer PDPP-3T. These results demonstrated that constructing random copolymers by incorporating more electronic donors into D-A conjugated polymers may be a promising strategy for developing TE conjugated polymers.     

Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

Efficient Piezoelectric Energy Harvesting from a Discrete Hybrid Bismuth Bromide Ferroelectric Templated by Phosphonium Cation

Bismuth containing hybrid molecular ferroelectrics are receiving tremendous attention in recent years owing to their stable and non-toxic composition. However, these perovskite-like structures are primarily limited to ammonium cations. Herein, we report a new phosphonium based discrete perovskite-like hybrid ferroelectric with a formula [Me(Ph)₃P]₃[Bi₂Br₉] ( MTPBB ) and its mechanical energy harvesting capability. The Polarization-Electric field (P-E) measurements resulted in a well-defined ferroelectric hysteresis loop with a remnant polarization value of 2.1 μC cm⁻². Piezoresponse force microscopy experiments enabled visualization of the ferroelectric domain structure and evaluation of the piezoelectric strain coefficient (d₃₃) for an MTPBB single crystal and thin film sample. Furthermore, flexible devices incorporating MTPBB in polydimethylsiloxane (PDMS) matrix at various concentrations were fabricated and explored for their mechanical energy harvesting properties. The champion device with 20 wt % of MTPBB in PDMS rendered a maximum peak-to-peak open-circuit voltage of 22.9 V and a maximum power density of 7 μW cm⁻² at an optimal load of 4 MΩ. Moreover, the potential of MTPBB -based devices in low power electronics was demonstrated by storing the harvested energy in various electrolytic capacitors.     

碳纳米管制备蓝光石墨烯量子点及其在柔性有机存储器上的应用

通过化学裁剪法打开碳纳米管获得了粒径一致、性能稳定、具有蓝色荧光的石墨烯量子点。该方法属于化学溶液法，具有成本低廉、工艺简单、条件易控等优势。将该样品与半导体聚合物按一定比例混溶，通过旋涂技术形成基于石墨烯量子点掺杂的聚合物复合薄膜，进而制成柔性存储器。该柔性可弯曲存储器具有低驱动电压、接近10³的ON/OFF 比率、较好的循环次数，较好的重复性和稳定性。该研究结果为柔性有机存储器领域的研究展开了新的方向。     

Structural characterization,thermal stability,and solvent de-/ad-sorption behavior of two d10 M(II) (M = Cd and Zn) coordination polymers constructed by 1,3,5-tris(4-pyridylsulfanyl-methyl)-2,4,6-trimethyl-benzene (L1)

Two d¹⁰ M(II) (M = Cd and Zn) coordination polymers (CPs) with chemical formulas, {[Cd(L¹)(NCS)₂(H₂O)]⋅C₂H₅OH}_n (1) , and {[Zn(L¹)(NCS)₂]⋅C₂H₅OH⋅0.5H₂O}_n (2) (L¹ = 1,3,5-tris(4-pyridylsulfanylmethyl)-2,4,6-trimethylbenzene) were synthesized and structurally characterized by single-crystal x-ray diffraction method. In compound 1 , the coordination environment of Cd(II) ion is distorted octahedral bonded to three nitrogen donors from three L¹ ligands located in a facial-position, two nitrogen donors from NCS⁻ and one water molecule. The L¹ acts as a bridge ligand with tris-monodentate coordination mode in a cis-cis-cis structural conformation, connecting the Cd(II) to form a two-dimensional (2D) zigzag-like layered metal-organic frameworks. Adjacent 2D layers are then arranged orderly in an ABAB manner to complete its three-dimensional (3D) supramolecular architecture. In compound 2 , the coordination environment of Zn(II) ion is distorted tetrahedral bonded to two nitrogen donors from two L¹ ligands and two nitrogen donors from two NCS⁻ ligands. The L¹ acts as a bridge ligand with bis-monodentate coordination mode in a cis-cis-cis structural conformation, connecting the Zn(II) ions to form a one-dimensional (1D) zigzag-like polymeric chain. Adjacent chains are arranged orderly in an alternate ABAB manner to generate a 2D framework and then further arranged in an AAA manner to complete its 3D supramolecular architecture. The structural characterization as well as thermal-stability and solvents de-/ad-sorption behavior of 1 and 2 are studied and discussed in details.     

电场下离子型聚合物复合囊泡结构变化的分子动力学模拟

利用粗粒化分子动力学模拟研究了电场作用下离子型聚合物复合囊泡形变与破裂的过程.定量分析了囊泡破裂过程中的结构变化,包括囊泡的形变程度、破裂速度、组分分布以及破裂后的结构.研究表明,电场强度较弱时,囊泡表面所吸附的聚电解质首先脱落,囊泡由球形结构转变为椭球结构.随着电场强度增大,离聚物的离子侧基发生重新排布,囊泡表面电荷的有序结构被破坏,导致囊泡的结构无法维持而破裂,囊泡塌缩,分裂形成离聚物团簇,并进一步破裂为小尺寸的离聚物聚集体,均匀分散于溶液中.本文利用分子动力学模拟明确了电场中离子型高分子复合囊泡破裂过程的分子机理,为药物释放技术的优化及发展提供了理论支持.     

可再生纤维素/环糊精聚合物对水中亚甲基蓝吸附行为

利用甘蔗渣提取纤维素修饰环糊精聚合物,成功制备可再生纤维素/环糊精聚合物（SUG-EPI-CDP）吸附剂。采用傅利叶红外光谱仪（FT-IR）与热重分析仪（TGA）对材料进行表征,同时考察了该材料对水中亚甲基蓝（MB）吸附特性和机理的影响。结果表明：在溶液pH值为7、温度为30 ℃的条件下,SUG-EPI-CDP可在120 min内有效去除MB,去除率达80.9%。通过模型拟合发现,SUG-EPI-CDP对MB的吸附是自发且吸热的过程,符合准二阶动力学方程和Langmuir等温线模型。该吸附剂实验最大吸附量达8.1 mg/g,远高于其他废料所制备的吸附剂。结果表明,利用可再生纤维素修饰可有效提高环糊精聚合物的吸附性能,同时为甘蔗渣资源化利用提供了新途径。     

Effect of different starch contents on physical,morphological, mechanical,barrier, and biodegradation properties of tapioca starch and poly(butylene adipate-co-terephthalate) blend film

Study on degradation behaviors of biodegradable poly(butylene adipate-co-terephthalate) (PBAT) blended with different compositions of thermoplastic starch (TPS) under soil burial and natural weathering environments is vital in order to predict the product service-life and planning for in situ biodegradation after product disposal. In this article, different compositions of TPS (0%, 20%, 40%, 50%, and 60%) were compounded with PBAT using single screw extruder. The samples were characterized for their tensile properties, fractured surface morphology, water barrier and surface hydrophorbicity properties in order to investigate the effect of starch fractions in PBAT blends. The degradation behavior under natural weathering and soil burial conditions was also determined during the 9 months duration by observing the change of physical appearance, weight loss, surface morphology, chemical structural, and tensile properties. The findings showed that the addition of TPS (20%, 40%, 50%, and 60%) had led to a reduction in tensile strength (41.47%, 60.53%, 63.43%, and 68.53%), and reduction in elongation at break (42.92%, 92.1%, 92.23%, and 93.22%, respectively) and water barrier properties. The findings also showed that there were distinct degradation behavior under both conditions. Upon exposure to natural weathering, photodegradation and Norrish type I & II occurred whereas under the soil burial condition, hydrolytic, and enzymatic degradation take places. Sample with the highest starch contents underwent the highest weight loss and reduction in tensile properties under both environments. The findings in this study are useful in order to investigate the feasibility of PBAT/Tapioca starch blends for biodegradable plastic film for various industrial applications especially in packaging and agricultural mulch.     

A Gel Polymer Electrolyte with 2D Filler-reinforced for Dendrite Suppression Li-Ion Batteries

Gel polymer electrolytes (GPEs) incorporate both the high ionic conductivity of organic liquid electrolyte and the high safety performance of all-solid-state electrolytes (ASSEs), greatly improving the electrochemical performance of solid polymer electrolytes (SPEs). However, the practical application of GPEs is still limited by inferior interface compatibility, lithium dendrites, etc. Herein, we prepared GPEs based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) further co-blended the two-dimensional sheet inorganic filler hectorite and poly(methyl methacrylate) (PMMA) to improve the mechanical and electrochemical properties of the GPEs. When the content of PMMA and hectorite is optimal, this GPEs have an ionic conductivity of 1.06×10⁻³ S cm⁻¹ and outstanding lithium symmetric cells cycle time of more than 3000 h, indicating that the introduction of filler effectively inhibits the growth of lithium dendrites at room temperature. Moreover, the GPEs adopt a relatively simple solution casting method to provide a fresh idea for the synthesis of high-performance GPEs.     

Organic Memristor Based on High Planar Cyanostilbene/Polymer Composite Films

Organic memristors with low power consumption, fast write/erasure speed, and complementary metal-oxide-semiconductor(CMOS) compatibility have attracted tremendous attention to mimic biological synapses to realize neuromorphic computation in recent years. In this paper, organic resistive switching memory(ORSM) based on (Z)-3-(naphthalen-2-yl)-2-(4-nitrophenyl)acrylonitrile(NNA) and polymer poly(N-vinylcarbazole)(PVK) composite film was prepared by spin-coating method. Device performance based on NNA:PVK composite films with different mass fractions of NNA were systematically investigated. The ORSM based on PVK:40%(mass fraction) NNA composite film exhibited non-volatile and bipolar memory properties with a switching ratio(I_on/I_off) of 24.1, endurance of 68 times and retention time of 10⁴ s, a “SET” voltage(V_set) of -0.55 V and a “RESET” voltage(V_reset) of 2.35 V. The resistive switching was ascribed to the filling and vacant process of the charge traps induced by NNA and the inherent traps in PVK bulk. The holes trapping and de-trapping process occurred when the device was applied with a negative or positive bias, which caused the transforming of the conductive way of charges, that is the resistive behaviors in the macroscopic. This study provides a promising platform for the fabrication of ORSM with high performance.